Abstract The beginnings and ends of guardrail designs have the function of providing adequate anchorage for the rest of the system. They should also demonstrate crashworthy performance and should not pose any hazard for errant vehicles. In Europe, the ends of guardrail systems traditionally have incorporated turned down end terminals. Due to its low cost, Turkey also adopted turned down guardrail end terminal, and the majority of these designs are 12 meters long. Accident statistics clearly demonstrate that this particular end terminal poses safety risks for impacting vehicles. However, crash tests performed on the system showed that it worked satisfactorily for cars impacting at 80 kph. In this study, a detailed finite element analysis was performed on a 12 m long turned down guardrail end treatment to fully evaluate its crashworthiness. Data obtained from previously performed TT 2.1.80 and TT 4.2.80 crash tests were used to verify the fidelity of finite element models used in the study. Further simulations performed in accordance with EN1317 part 7 at 100 kph demonstrated unacceptable performance for the end terminal. Results of the study are summarized and recommendations are presented.